Keithley pitched the Model 2000 as a fast, accurate 6½-digit DMM you could afford, built on the same A/D converter technology as its 7½-digit 2001 and 8½-digit 2002. Its manual is copyright 1994. It has 13 functions, with thermocouple temperature and a 300 kHz frequency counter built in, and both GPIB and RS-232 as standard. Keithley also gave it command modes for the Fluke 8840A and 8842A and its own 196 and 199, so it could drop into old test racks without new software. The rear option slot takes the 10-channel 2000-SCAN card, which turns it into a small scan-and-measure system. Keithley has since discontinued it and points owners to the DMM6500, which accepts 2000-series scan cards.
13, including DC and AC volts and amps, 2- and 4-wire ohms, thermocouple temperature and frequency to 300 kHz
Interfaces
IEEE-488 (GPIB) and RS-232, both standard
Speed
Up to 2,000 readings a second at 4½ digits
Scanner
Rear option slot for a 10-channel scanner card
Mains input
100, 120, 220 or 240 V, selector by the rear fuse holder
Current fuse
3 A 250 V fast-blow, 5×20 mm, in the front AMPS jack
Also listed as
Model 2000, 2000 6.5 digit
Typical eBay ask (Oct 14, 2026)
$420–$675
Options and accessories
What should come with it
2000-SCAN 10-channel scanner card
2001-TCSCAN 9-channel thermocouple scanner card
Check the listing photos and the rear panel against this list, and ask the seller about anything you can’t see. A missing option or probe should come off the price.
What to check
xdevs, which has repaired several, recommends replacing the electrolytic capacitors in any second-hand 2000 because leaking electrolyte damages the boards. It also documents dimming displays and a front/rear input switch whose contacts wear and cause jumpy readings.
01Self-test: Ask for a photo of the display just after power-on. It should show the firmware revisions and then a reading, with no error message.
02Input switch: Ask the seller to press the front/rear INPUTS button a few times while reading a battery. The reading should come back steady each time.
03Display: Ask for a photo of the display in normal room light. It should be bright and even, with no dim or missing segments.
04Capacitors: Ask whether the electrolytic capacitors have been replaced. A recap by a known repairer is a good sign on a meter this age.
05Scanner card: Ask whether a 2000-SCAN card is fitted in the rear slot. If you need scanning, a listing with the card saves a separate hunt.
06Line voltage: Ask which line voltage the rear selector is set to. It must match your mains (100, 120, 220 or 240 V).
07Calibration: Read what any calibration claim is based on. A dated certificate from a named lab, with data, means something, and a sticker or "cal'd" in the title proves little.
We'd buy the 2000 titled tested and working from a US test-equipment dealer at $650 delivered for an easy first one, or the $388 China unit whose photo shows it reading 10 V next to a reference source if you're fine buying from overseas. There are at least 121 for sale, and most are China resellers asking about $350–500 delivered with watermarked photos that turn up under other sellers' names, so ask for a photo of the actual unit showing its serial and the power-on screen. xdevs recommends replacing the electrolytic capacitors in any second-hand 2000, so ask whether that's been done. Ask the seller to press the front/rear INPUTS button a few times while it reads a battery, and the reading should come back steady each time. Skip the $352 listing whose photo carries another seller's name, and the $3,350 one at about seven times the $483 median.
Listed now
121
For parts
0
Typical ask
$420–$675
Full range
$275–$3,200
★Cheapest
$388.00est. delivered
The lowest delivered 2000 at $388 that isn't using another seller's photo, titled good working, and the photo shows it reading 10 V next to a reference source. It ships from China, so ask for a photo of this unit with its serial and the power-on screen.
1 pcs Keithley 2000 Digital Multimeter /good working*ytd
Under the $420–675 band with a photo of it reading a 10 V reference, which says more than a lit display. Ask whether the capacitors have been replaced, since xdevs recommends it on any second-hand 2000.
1 pcs Keithley 2000 Digital Multimeter /good working*ytd
Titled tested and working, from a US test-equipment dealer, at $650 delivered inside the band. Shipping is $150, so ask how it'll be packed and whether the dealer takes returns.
Keithley 2000 6.5 Digit Precision Multimeter DMM GPIB - Tested and Working
Delivered prices include shipping as eBay quoted it to a US address on Oct 14, 2026. Many sellers charge by distance, so your total may differ. eBay shows yours before you pay.
Snapshot
For sale on eBay
8 of 121 listed
Checked . Some may have sold.
Delivered prices include shipping as eBay quoted it to a US address on Oct 14, 2026. Many sellers charge by distance, so your total may differ. eBay shows yours before you pay.
Used
★Cheapest
★Best value
1 pcs Keithley 2000 Digital Multimeter /good working*ytd
$388.00est. delivered
$358.00 + $30.00 shipping
Buy It Now$358.00
Good buy
Ships from China, titled good working. Photo shows it reading 10 V next to a reference source.